|
|
| *SportsComet>>>Motorcycle Racing |
What is the best way to clean an aluminum exhaust pipe on a motorcycle? |
I think a wheel cleaner sprayed onto the bike and warm exhaust and has left some white residue that is difficult to remove. After the exhaust pipes (motorcycle) are cool to the touch, soak the crud with a petroleum based product over night or longer. (Use an old cotton sock or similar - non-dyed - rag). I have tried: SAE 20 weight oil, WD-40, carburator cleaner, gasoline, and fuel oil. A few other solvents and cleaners have limited success: acetone, paint thinner, mineral spirits, wood alcohol, chrome cleaner, and rubbing compound. Plastic (non-abrasive scrubbers), old white cotton socks, and polishing cloth were used as applicators for the various listed products. As stated, crud removal is a slow, laborious process. Be patient. The crud will eventually loosen. Source(s): GMASW They have aluminum engine cleaners at most auto parts stores. Toyota dealer has a good one also. oven cleaner YOU CAN USE SOME EASY OFF FOR THE KITCHEN the best way would be to ask this in the correct forum |
| Tags |
| Hunting General - Outdoor Recreation Olympics Motorcycle Racing Martial Arts Horse Racing |
Sports Categories--Copyright/IP Policy--Contact Webmaster |